Справочник Пользователя для Lucent Technologies Release 6
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Telecommunications Cabling
Page 2-6
Install Equipment and Cables
2
Install Equipment and Cables
Hardware Installation
The following procedures assume 1 system technician is performing the
installation. Procedures are provided for installing the following:
installation. Procedures are provided for installing the following:
■
Main Distribution Frame (MDF)
■
■
■
Install the Main Distribution Frame
The preferred MDF location is directly behind the system cabinets.
Wall Mounting 110A-Type Terminal Blocks
The 110A-type hardware can be stacked in almost any arrangement at any
height or location on the wall. One arrangement is shown in
height or location on the wall. One arrangement is shown in
. The
distance between the mounting screw holes on the terminal blocks is 10.81
inches (27.4 cm). If a vertical patch cord trough is used, the distance between
the mounting screw holes is 5.31 inches (13.3 cm).
inches (27.4 cm). If a vertical patch cord trough is used, the distance between
the mounting screw holes is 5.31 inches (13.3 cm).