Справочник Пользователя для Pelco IP3701H-2X
C2941M (8/07)
11
Wiring Tables
CAT5 CABLE
Connect a Cat5 cable to the RJ-45 network connector. The 8-pin connector includes video and PoE for the
camera. PoE (IEEE 802.3af) injects power over the same cabling that carries the network data, eliminating
the need for a separate power supply. This simplifies the installation and operation of the camera without
any degradation of network performance.
camera. PoE (IEEE 802.3af) injects power over the same cabling that carries the network data, eliminating
the need for a separate power supply. This simplifies the installation and operation of the camera without
any degradation of network performance.
24 VAC AND BNC CONNECTIONS (OPTIONAL)
If PoE is not used, the camera includes a 24 VAC power connector. Connect the power cable to the 2-pin
power connector on the back of the camera using the terminal block connector (provided). Refer to Table C
for the recommend wire gauge and wiring distances.
power connector on the back of the camera using the terminal block connector (provided). Refer to Table C
for the recommend wire gauge and wiring distances.
Figure 6.
Power Supply Connections
Table B.
Pin Descriptions
Pin
Function
1
TX+
2
TX-
3
RX+
4
PoE 1-2
5
PoE 1-2
6
RX-
7
PoE 3-4
8
PoE 3-4
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
8
8
1
1
24 VAC
CLASS 2
ISOLATED
POWER
SUPPLY