Справочник Пользователя для Pelco ED29/ED2920
PELCO Manual C460M-E (7/95)
9
4.4.1.2 Corner Mounting
The ED28/ED2820 series may be mounted to the out-
side corner of a structure using the CM100 Corner
Mount Adapter.
side corner of a structure using the CM100 Corner
Mount Adapter.
To attach the enclosure to an outside corner, perform the
following steps (see Figure 10):
following steps (see Figure 10):
1.
Secure the CM100 corner mount adapter as stated
in the installation manual provided with the mount.
in the installation manual provided with the mount.
2.
Mount the enclosure to the CM100 using four (4)
1/4-inch diameter fasteners.
1/4-inch diameter fasteners.
3.
Route the power cord and control cables through
the hole in the mount arm and make the necessary
connections.
the hole in the mount arm and make the necessary
connections.
4.
Install the pan/tilt with the camera/lens mounted.
Figure 10. Corner Mounting