Справочник Пользователя для Pelco IXE
36
C2953M-A (5/09)
TONE MAP
Tone map balances the brightest and darkest sections of an image to produce a picture with more balanced lighting and more detail. This is
accomplished, in part, when the device maps the 10-bit input sensor data (0 to 1023 bits) into 8-bit output RGB values (0 to 255 bits). Use the
sliders to easily adjust an image's black clip percent, white clip percent, and gamma correction.
accomplished, in part, when the device maps the 10-bit input sensor data (0 to 1023 bits) into 8-bit output RGB values (0 to 255 bits). Use the
sliders to easily adjust an image's black clip percent, white clip percent, and gamma correction.
Figure 26. Tone Map Page
The tone map runs only in auto mode and includes the following settings:
Black Clip Percent: Adjusts the percent of pixels set to black. Move the slider to the right to darken the scene by increasing the number of
pixels that are mapped to absolute black. The black clip percent range is 0 to 25; the default setting is 0.5.
pixels that are mapped to absolute black. The black clip percent range is 0 to 25; the default setting is 0.5.
White Clip Percent: Adjusts the percent of pixels set to white. Move the slider to the right to lighten the scene by increasing the number of
pixels that are mapped to absolute white. The white clip range is 0 to 25; the default setting is 0.5.
pixels that are mapped to absolute white. The white clip range is 0 to 25; the default setting is 0.5.
Gamma Correction: Adjusts the details in the light and dark areas of the scene. Move the slider to the left to expose more detail in the light
areas of the scene; move the slider to the right to expose more detail in the dark areas of the scene. The gamma corrector range is 0.1 to 3.0; the
default setting is 2.2.
areas of the scene; move the slider to the right to expose more detail in the dark areas of the scene. The gamma corrector range is 0.1 to 3.0; the
default setting is 2.2.