Справочник Пользователя для Pelco PANASONIC WV-NP244

Скачать
Страница из 6
C1009RN (9/08)
Page 1 of 6
Panasonic IP Cameras Supported on Digital Sentry
Integral Digital Sentry
®
 digital video management systems (DVMS) support certain 
Panasonic
®
 IP camera models. The camera models listed in this document can be used 
with Digital Sentry IP camera driver version 6.8.0.126 and later. Refer to each camera’s 
table for information about the hardware and software features validated for use on a 
Digital Sentry system. Any general limitations or special instructions are listed at the 
beginning of the document, and any model-specific information is listed after each table. 
For information about the general usage of each camera, refer to the camera 
manufacturer’s documentation.
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer 
.
General Panasonic IP Camera Notes
• If the frame rate is set to a value larger than the maximum value for a camera, the 
frame rate defaults to the maximum value.
• Frame rates are rounded up to the next value listed in the tables. For example, if the 
requested frame rate is 8 frames per second (fps), the camera provides 10 fps.
• Because of a limitation regarding the number of users viewing feeds from the 
camera, the frame rate requested might not match what the camera can supply at 
that time. The camera automatically logs off users who are not actively using the 
feeds, which then increases the total throughput for remaining users.
• Frame rates could be reduced as quality settings are increased.
• All camera-specific Panasonic drivers have been replaced by a single Panasonic i-Pro 
driver in DSAdmin.
• To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5 
or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all 
necessary software versions, go to 
.
• To view images larger than 2 MP, you must install Megapixel Support for DS Client/
Admin 4.1 and DS ControlPoint 6.5.1.28 or later. To obtain a copy of all necessary 
software versions, go to 
.
Release Notes