Справочник Пользователя для Pelco MR5000L

8

Pelco Manual C221M-C (6/03)

a.

Connect the video cable to the BNC video input on the rear panel of the monitor.

b.

Plug the power cable into the AC INLET connection on the rear panel of the monitor.
Refer to the manual supplied with the monitor for operating instructions.

a.

Monitor Rack - Refer to Figure 7 and adjust the monitor angle. The rack is adjustable
in 5-degree increments up to a 15-degree angle.

b.

Mount Arm - Turn mount arm to desired position. Tighten the bottom set screw on the
swivel collar to secure in place.

C221M

9/01

Original version.

C221M-A

9/02

Revised 

Important Safeguards and Warnings

 and added an installation warning.

C221M-B

2/03

Supplied hardware revised.

C221M-C

6/03

Added ETL Listing and revised Safeguards and Warnings.

®  Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.

© Copyright 2003, Pelco.

All rights reserved.

Secure the monitor
to the rack before

adjusting the angle of the
rack.

Pelco will repair or replace, without charge, any merchandise proved defective in
material or workmanship for a period of one year after the date of shipment. Ex-
ceptions to this warranty are as noted below:

•

Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and
MC3500/MC3600 Series); two years on all other cameras.

•

Three years on Genex

®

 Series (multiplexers, server, and keyboard) and

090 Series Camclosure

®

 Camera System.

•

Two years on 100/150, 200, and 300 Series Camclosure Camera Systems.

•

Two years on all standard motorized or fixed focal length lenses.

•

Two years on Legacy

®

, CM6700/CM6800/CM6800E/CM8500/CM9500/

CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome products.

•

Two years on Spectra

®

, Esprit

®

, and PS20 Scanners, including when used in

continuous motion applications.

•

Two years on Esprit and WW5700 series window wiper (excluding wiper blades).

•

Eighteen months on DX Series digital video recorders.

•

One year (except video heads) on video cassette recorders (VCRs). Video heads
will be covered for a period of six months.

•

Six months on all pan and tilts, scanners or preset lenses used in continuous
motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of
Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid
to Pelco, Clovis, California. Repairs made necessary by reason of misuse,
alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s liability
for any claim, whether based on breach of contract, negligence, infringement of
any rights of any party or product liability, relating to the Products shall not exceed
the price paid by the Dealer to Pelco for such Products. In no event will Pelco be
liable for any special, incidental or consequential damages (including loss of use,
loss of profit and claims of third parties) however caused, whether by the negligence
of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may
also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100
or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the
following information:

1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under
the warranty conditions stated above, please include a written explanation with
the product when returned.

Method of return shipment shall be the same or equal to the method by which the
item was received by Pelco.

In order to expedite parts returned to the factory for repair or credit, please call
the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization num-
ber (CA number if returned for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and
refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned
CA or RA number and freight should  be prepaid. Ship to the appropriate address
below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico:

Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:

American Overseas Air Freight

Pelco

320 Beach Road

3500 Pelco Way

Burlingame, CA 94010

Clovis, CA 93612-5699

USA

USA