Справочник Пользователя для Pelco EH5700L

Pelco Manual C1422M-C (4/98)

9

If your enclosure has a thermostatically controlled blower, the thermostat is set to
turn the fan on between 77° and 93°F (25° and 34°C) and to turn the fan off be-
tween 62° and 78°F (17° and 26°C).

If you enclosure has thermostatically controlled heaters or defroster, the thermo-
stat is set to turn them on between 42° and 58°F (6° and 14°C) and to turn them off
between 72° and 88°F (22° and 31°C).

Perform the following maintenance at regularly scheduled intervals to prolong the
operational life and appearance of the equipment.

1.

Clean the window with a mild nonabrasive detergent in water and a soft cloth
to maintain picture clarity.

2.

If your enclosure has a blower, clean the foam filters as follows:

On the bottom front of the enclosure, remove the two screws in the vent grill.

Remove the vent grill and take out the filters.

Clean the filters with warm water and mild detergent, dry thoroughly, and re-
place them in the grill.

Reinstall the vent grill.

To order replacement filters, use the part number EH550010045.

If you need to service your unit, obtain a service manual in on of the following ways:

•

Go to Pelco’s web site at www.pelco.com and find service manual C1431SM.

•

Contact Pelco’s Literature Department and request service manual C1431SM.