Справочник Пользователя для Pelco CCC1380UH-6X

 

3

C2935M-QS (2/06)

 

Use the five-position button on the side panel to access and navigate the setup menus. The fol-
lowing table lists the button presses for each menu action.

 

The CCC1380UH Series camera supports both manual and auto iris lenses, either fixed focal length 
or varifocal. It automatically senses an auto iris lens as soon as you plug in the connector.

The camera has a standard CS-mount that can accept a C-mount lens with a PCMA40 lens adapter.

To mount the lens onto the camera:

1. Make sure the lens will not touch the camera imager when installed.

2. Use clean, compressed air or a clean, dry lens cloth to make sure there is no dust or other 

foreign matter between the lens and the camera imager.

3.

 

Screw the adapter onto the lens.

4. Screw the lens onto the lens mount.

5.

 

 Connect the four-pin connector from the lens to the connector on the side 

of the camera.

6. Perform the lens focusing procedure before using the lens (refer to 

 

).

 

Enter setup menus.

Long center press

Move up or down in menu or item options.

Up or down press

Move right or left in menu.

Right or left press

Select menu or item.

Short center press

Save setting and exit to menu.

Short center press

 

C2935M-QS web.fm  Page 3  Friday, February 10, 2006  11:09 AM