Справочник Пользователя для Pelco CM9760-KBR

C540M-C (10/05)

41

You can also control multiplexers with the CM9760-KBD keyboard. You can connect multiplexers to any input and configure the MUX for 
operation within the CM9700 system using the CM9700-MGR. Refer to the CM9700-MGR Software Guide.

To control a multiplexer:

1. Enter a MUX input number from the Main Menu.

2. Press 

Figure 63.  MUX Control Menu

3. Select an icon. The icon functions are described in Table B.

Table B.  MUX Control Icons

Select this icon to bring up the MUX VCR control menu for operating the VCR. The menu appears only if a VCR for 
camera recording is connected to the MUX and configured properly in the software.

Select this icon to toggle the main monitor display between live inputs and playback from the VCR.

Enter a camera number and select this icon. You can go through all 16 screens. Selecting this icon once enables 
2X zoom and selecting it twice enables 4X zoom.

Select this icon to display a picture in picture insert on the main monitor display. You can cycle through all 

16 screens in the picture insert by entering a camera number and selecting 

.

Select this icon to bring up 4 of the available 16 screens. You can cycle through all 16 screens, four at a time, by 
repeatedly selecting the icon.

Select this icon to bring up 9 of the available 16 screens.

Select this icon to view all 16 available screens at the same time on the main monitor.

1

1