Справочник Пользователя для Pelco CM9760-KBR

46

C540M-C (10/05)

To disarm an alarm:

1. From the Main Menu, enter the logical number of the required alarm and select 

. 

2. Select 

. The icon lightens meaning that the alarm is disarmed.

NOTE:  While in the Alarm Menu, you can use 

 or 

 to go through all of the alarms. This is the easiest way to find out the status 

(armed or disarmed) of each alarm.

When an alarm is triggered, you will see [alarm] flashing plus an alarm number on the LCD display. The alarm volume can be raised or lowered by 
using the volume control on the bottom of the keyboard.

To reset a triggered alarm:

1. Select 

 from the Main Menu. The triggered alarm appears on line 3 on the LCD display. Refer to Figure 74.

Figure 74.  Triggered Alarm Menu

2. Select the appropriate icon to disarm the alarm, mute the alarm, pause the alarm, or reset the alarm. 

NOTE:  Select 

 to reset all triggered alarms. 

To log out from Operation Mode:

1. Press 

. The Main Menu appears on the LCD display.

2. Select 

. The following appears on the LCD display.

Figure 75.  Verify Logoff

3. Select .

NOTE:  You can also select monitor 0 to log off from the Main Menu.

ARM

DIS’

1

1

1

1

R

R

A

1

YES

NO

Are you sure logoff?

1