Справочник Пользователя для Pelco C3412M-D

66

C3412M-D (12/08)

6. The blanked area can be programmed to turn on or off at a specified zoom point. To set the 

zoom point:

a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press 

Iris Open.

b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to 

set the zoom point.

Since the area is already blanked out, it may be difficult to determine when you want 
window blanking to turn on. Reverse the window before setting the zoom point. When 
finished reverse the window again to blank out the area.

Increase the size of the window if any part of the blanked area is revealed during PTZ 
operations.

The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 80) with the 
following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also, the 
Holiday feature cannot be accessed from the Edit Schedule menu.

For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on 
page 83.

A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. 
The areas above and below the blanking area remain visible. Reversing the window a second 
time will return it to its original condition.

All areas that have been set for window blanking are cleared.

EXIT

SPECTRA IV

LANGUAGE 

<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*

RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM

BACK
EXIT

<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>

DOME SETTINGS

BACK
EXIT

SET WINDOWS

WINDOW NUMBER 

<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
<EDIT SCHEDULE>

ENABLE WINDOW 

        

REVERSE
CLEAR WINDOW

BACK
EXIT

STYLE 

BLANK ALL ABOVE 
BLANK ALL BELOW 

<SET WINDOWS>

WINDOW BLANKING

* This setting applies only to Pressurized Spectra IV dome systems.