Справочник Пользователя для Pelco DD53M22-X
28
C2443M-D (11/05)
Power Up
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the
power to the dome is cycled.
power to the dome is cycled.
The following settings are available:
NONE
No action.
AUTO (default)
The dome resumes its prior activity or direction before the power
outage.
outage.
AUTO SCAN
Dome starts auto scan operation.
RANDOM SCAN
Dome starts random scan operation.
FRAME SCAN
Dome starts frame scan operation.
PRESET 1
Dome goes to preset 1.
PRESET 8
Dome goes to preset 8.
PATTERN 1
Dome runs pattern 1.
PATTERN 2
Dome runs pattern 2.
PATTERN 3
Dome runs pattern 3.
PATTERN 4
Dome runs pattern 4.
BACK
EXIT
EXIT
POWER UP
POWER UP ACTION
AUTO
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
systems with software version
1.25 or higher.