Справочник Пользователя для Pelco C540M (6/98)

12

Pelco Manual C540M (6/98)

Intercept

®

 receiver/drivers can be connected directly to the CM9760-KBD. In this

configuration, cameras are controlled directly by the keyboard, and not via an inter-
mediate switching matrix controller. Thereafter they may be controlled directly.

The receiver/drivers are connected to COM 1 and/or COM 2. Up to 16 cameras can
be connected to a single COM port, giving a maximum of 32.

Use Figure 6 as a guide for the physical connection of receiver/drivers and associ-
ated cameras to the CM9760-KBD for direct mode, then follow the below instruc-
tions for configuring the system in direct mode.

1.

As before, enter direct setup by setting DIP switch 2 to the ON position, then
enter you setup PIN number; the main menu screen, “SETUP MODE”, will
appear.

2.

Press the multipurpose key under the  

  icon and advance to the “Ad-

vance Setup 1” screen.

3.

Use  

  and  

  to navigate to the “host” row and use the arrow keys

( 

 ,  

 ) to select “Direct Cam Ctrl.”

4.

Use the  

  key to go to COM 1 and/or COM 2 and setup the keyboard

COM ports for the correct baud rate. Save, then Exit this screen to return to
the main menu “SETUP MODE” screen.

> COM 1

PELCO

COM 2

PELCO

Figure 6.  Direct Mode Hookup

DIRECT MODE HOOKUP
(REMEMBER THAT TX+ 
GOES TO RX+ AND TX- 
GOES TO RX- WHEN 
CONNECTING YOUR
WIRES.)

UP TO SIXTEEN (16)
RECEIVER/DRIVERS
AND ASSOCIATED
CAMERA INPUTS

UP TO SIXTEEN (16)
RECEIVER/DRIVERS
AND ASSOCIATED
CAMERA INPUTS

PELCO CM9760-KBD

COM 2

COM 1

POWERPAK

RECEIVER/
DRIVER

RECEIVER/
DRIVER

RECEIVER/
DRIVER

RECEIVER/
DRIVER

RECEIVER/
DRIVER

RECEIVER/
DRIVER

PIN 1 TX+
PIN 2 TX-

PIN 1 TX+
PIN 2 TX-