Справочник Пользователя для Pelco SD5BCBW

4

Pelco Manual C2423M (5/00)

When the Spectra II™ dome is powered up, the selected protocol, revision number, and
other information is displayed on the monitor. For example, the screen might show the
following information:

The information displayed depends on the selected
protocol (C, D, or P) and the menu selection for power-
up mode. (Refer to the 

Power-Up Mode in the

Programming

 section).

The information remains on the monitor until the dome
is moved.

Move joystick left/right and up/down.

Stop Scan

Preset 96

Random Scan

Preset 97

Frame Scan

Preset 98

Auto Scan

Preset 99

To zoom far, do the following:

1. Press the Zoom Tele button or turn the joystick clockwise until you have the picture you want or you

reach the optical zoom

 limit.

2. Release the button or joystick.

3. To continue zooming (digitally), immediately press the button or turn the joystick clockwise again until

you have the picture you want or you reach the digital zoom

 limit.

Press the Zoom Wide button or turn the joystick counterclockwise.

Refer to the documentation supplied with the controller.

Refer to the documentation supplied with the controller.

Refer to the 

Programming

 section and to the documentation supplied with the controller.

Refer to 

Alarms

 in the 

Operating Notes

 and in the 

Programming

 section.

Turn on or off in the programming menu. Refer to the 

Programming Guide

 in the 

Programming 

section.

1

Optical zoom magnifies the image and the picture remains clear. Resolution is constant.

2

Digital zoom magnifies the image and the picture may appear pixilated. The larger the zoom limit the greater the reduction in
resolution.

3

The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.

For more information, refer to 

Operating Notes

.

PELCO SPECT II 4.0
CONFIGURE DONE