Справочник Пользователя для Pelco c1405M-E

Pelco Manual C1405M-E (11/03)

13

Input Voltage:

24, 120 or 230 VAC, 50/60 Hz

Electrical
Connections:

One each of the following when equipped with optional circuit
board (O/I-PCB):

3-connector terminal block for power input

6-pin lens connector

9-connector terminal block for lens wiring

10-connector terminal block for camera/lens wiring

2-connector terminal block for spare connections

3-pin socket for camera power input

2-pin socket for optional camera power input

2-pin socket for blower

2-pin socket for defroster

4-pin socket for heaters

Input Power:

Heater-1

60 watts

Heater-2

50 watts

Heater-3

55 watts

Defroster

15 watts

Blower

8 watts

Construction:

Die-cast, extruded, and sheet aluminum

Finish:

Polyester powder coat, 2-tone gray

Cable Entry:

Two UL-approved glands on bottom of enclosure; maximum
cable diameter 0.47 inch (1.19 cm). Will accept 1/2-inch (1.27
cm) conduit without glands.

Window:

Plastic

Window
Viewing Area:

3.50" H x 4.00" W
(8.89 x 10.16 cm)

Camera
Mounting:

Removable camera sled that can be inverted to accommodate
various heights of cameras and lenses

Maximum
Camera/Lens
Size:

Accommodates camera/lens combinations (including BNC
connector) up to:
EH4718
17" L x 5.5" W x 4.25" H