Справочник Пользователя для VIVOTEK SD8111

 

 

This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via 

the control panel and how to preset locations.

On this page, you can preset positions for the Network Camera to go to directly or patrol. A total of 128 

preset positions can be configured. 

Please follow the steps below to preset a position:

1. Adjust the shooting area to a desired position using the buttons on the right side of the window. 

2. Click 

Set Current Position as home or Restore Home Position to Default to define your home 

position.

3. Enter a name for the preset location, which allows for up to 40 characters. Click 

Add to enable the 

settings. The preset locations will be displayed under the Preset Location list on the left-hand side.

4. To add additional preset positions, please repeat step 1~3.

5. To remove a preset position from the list, select it from the list and click  . Click   or   to unfold or 

fold the list.

6. Click 

Save to enable the settings.

2010/05/06 13:44:17  

Functions are the 

same as the Control 

Panel on the home 

page.

1

2

5

6

3