Справочник Пользователя для VIVOTEK FD7141(V)

 

 

 

 

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting 

conditions�

1� Set the White balance to 

Auto and click Save�

2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color 

temperature automatically�

3. Select Keep Current Value to confirm the setting while the white balance is being measured.

4� Click 

Save to enable the new setting�

Image Adjustment

■ Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.

■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3� The default value is set to +3�

You can click 

Preview to fine-tune the image, or click Restore to recall the original settings without 

incorporating the changes� When completed with the settings on this page, click 

Save to enable the 

setting and click 

Close to exit the page� 

Privacy Mask 

Advanced Mode

Click 

Privacy Mask to open the settings page. On this page, you can block out sensitive zones to 

address privacy concerns� 

■ To set the privacy mask windows, follow the steps below:

1� Click 

New to add a new window�

2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size 

of the object (height and width) you want to cover�

3� Enter a Window Name and click 

Save to enable the setting�

4� Select 

Enable privacy mask to enable this function�

► Up to 5 privacy mask windows can be set up on the same screen�

► If you want to delete the privacy mask window, please click the ‘x’ on the upper right-hand corner of 

the window�