Справочник Пользователя для JVC TK-C215VP4

22

Upon mounting the camera, adjust the images 
while checking the actual image.

Connect the [MONITOR] terminal of this unit to 
the test monitor to adjust the camera’s shooting 
direction, angle of view and focus.

● Before setting, ensure to turn on the power of 

the system.

The camera unit can be panned, tilted or rotated. 
Adjust the camera in the direction of the object.

● Before touching the camera unit, make sure 

to touch the metal surface of the [MONITOR] 
terminal to discharge any static electricity 
from your body. Static electricity may cause 
the camera to malfunction.

● Before adjusting the shooting direction of the 

camera, ensure that the pan fastening screw 
is loosened. Moving the lens unit without 
loosening the pan fastening screw may 
damage the lens unit.

● Panning/rotation of ±175 ⬚ is possible from 

each of the camera unit’s shooting direction 
mark, pan center mark and rotation center 
mark. When adjusting the rotation, do not 
hold the lens unit. Always adjust by holding 
the rotation knob.

● When using the camera at locations with 

strong vibration after the angle of view is 
adjusted, stabilize by tightening the tilt 
fastening screw to prevent the camera’s 
angle of view from going out of alignment.
(

A Pg. 11)

● Moving the camera beyond its adjustable 

range may cause failure in maintaining the 
performance of this camera.

● As this camera has a wide tilt/rotation range, 

a part of this camera may appear on the 
screen depending on the angle of view and 
orientation.

● Do not hold the lens unit when adjusting the 

direction of the camera. Applying force on the 
lens unit may damage it.

[MONITOR] 
Terminal

Test Monitor

75 

K terminal

Tilting: ±70 

⬚

Panning: ±175 

⬚

Rotation: ±175 

⬚

O

N

UP

Camera’s shooting 
direction mark

Pan center mark

Rotation center mark

Rotation knob
: Always adjust the 

rotation by holding this 
knob.

TK-C215VP4_JP.book  Page 22  Wednesday, September 20, 2006  5:48 PM