Справочник Пользователя для Canon vb-s900f

Performing Operations and Settings in the Admin Viewer

137

A

d

min Viewer/

V

B

 V

iewer

Example of setting method:

Illuminate a white subject (white paper, etc.) using 

the light source, making sure the subject fills the 

entire screen, and then execute [One-shot WB].

[R Gain], [B Gain]

When setting the white balance manually, set the 

values of red and blue gain in the range 0 to 1023 to 

match the light source.

„ Setting the Day/Night Mode

(1) [Auto]

The camera automatically switches to day mode or 

night mode depending on ambient brightness.

(2) [Day Mode] 

Color video can be viewed in the normal mode. 

(3) [Night Mode] 

Video is shown in black and white.

Though the camera has an infrared filter, there is no effect on 

lighting due to infrared light as the camera does not have an 

insertion/removal mechanism for the filter.

„ Selecting the External Device Output

You can control external device output and display the 

current output status using an icon. Output can be 

activated and deactivated by clicking this icon.

„ Registering Custom Settings

By registering settings for camera position, exposure, 

white balance, etc. beforehand, you can load settings 

using manual or automatic control.

• In custom settings, the setting values for the following items in 

the Control for Admin menu can be saved.
[Smart Shade Control], [Exposure], [White Balance], [Image 

Quality Adjustment], [Day/Night]

 

[Pan/Tilt/Zoom]

[Focus]

• Since the light source selection options are based on 

representative characteristics, proper colors may not be 
achieved depending on the applicable light source. In this 

case, use the [One-shot WB] function.

• If the subject looks greenish under mercury lamps in the 

[Auto] mode, select the [Mercury Lamp] mode under light 

source. If the video is still not shown in appropriate colors 

under mercury lamps when the [Mercury Lamp] mode is 
selected under light source, use [One-shot WB].

• When the subject has only one color, illumination is low, or 

when sodium lamps, mercury lamps and certain other 

fluorescent lighting are used, colors may not be adjusted 

appropriately.

• When [Day/Night] is set to [Night Mode] (including when it is 

set to [Auto] and night mode is judged to be applicable), the 
white balance function cannot be used.

• Notes on capturing video continuously day and night

If a subject that seldom changes is captured in a location 

where the light source changes gradually, such as when 

capturing a subject continuously day and night, appropriate 
colors may not be achieved. 

In the above case, applying changes to the video to capture 

will achieve the appropriate colors.

(2)

(3)

(1)

If the viewer is exited in [Day Mode] or [Night Mode], auto day/

night stays disabled even if [Auto] is set in the setting page. To 

set auto day/night to enable, be sure to exit the viewer after 
setting [Auto].

Icon

Meaning

Output inactive state

Output active state