Справочник Пользователя для Canon VB-C500D

Input/Output Terminals

There are two sets of external device input terminals (IN1, IN2), where each set consists of two 

terminals. The - terminals are connected to the GND in the camera. Two-wire cables are 

connected to the + and - terminals to achieve electrical continuity or insulation between the two 

terminals for notification to the viewer. 

There are two sets of external device output terminals (OUT1, OUT2), where each set consists of 

two terminals. Each terminal set has no polarity. The condition between the two terminals can be 

switched between connected and disconnected by controlling from the viewer. The output 

terminals are isolated from the internal circuits of the camera using optical couplers. 

The loads connected to the output terminals should be used within the following ratings: 

Ratings between output terminals: 

Maximum voltage 50 VDC

Continuous load current 100 mA max. 

Color of spare 

wire

Type of corresponding 

terminal

Color of spare 

wire

Type of corresponding 

terminal

1

Black

OUT2_B

5

Yellow

IN2_-

2

Brown

OUT2_A

6

Green

IN2_+

3

Red

OUT1_B

7

Blue

IN1_-

4

Orange

OUT1_A

8

White

IN1_+

For the sensors and switches to be connected, connect terminals that are electrically isolated 

from each power supply or GND.