Справочник Пользователя для Airlink101 AIC1620W
- 35 -
4.5 Motion Detect
*This function can only be configured in Windows Internet Explorer.
The Motion Detect menu contains the command and option that allow you to enable and set up the
motion detection feature of the camera. The camera provides two detecting areas.
motion detection feature of the camera. The camera provides two detecting areas.
To enable the detecting area, select
Window 1 or 2 from the pull-down list, and then check Enable.
When the detecting area is enabled, you can use the mouse to move the detecting area and change the
area coverage.
area coverage.
-
Name: Assign a name to the detecting area.
-
Threshold: Move the slide bar to adjust the level for detecting motion. Make sure the threshold (the
horizontal line) is low (sensitive) enough to come across the waves (appear when motion detected),
so that the events (i.e, emailing snapshot, FTP uploading) you set up in
horizontal line) is low (sensitive) enough to come across the waves (appear when motion detected),
so that the events (i.e, emailing snapshot, FTP uploading) you set up in
Event Config will be
triggered.