Справочник Пользователя для Pelco C603M-A (11/07)
C603M-A (11/07)
13
RACK MOUNTING
Any combination of encoder, decoder, and transcoder units can be mounted together in the optional RK5100PS-5U rack mount kit, up to 12 units.
Each unit plugs directly into a power connector in the rack and is powered by the rack.
Each unit plugs directly into a power connector in the rack and is powered by the rack.
NOTES:
•
To ensure proper rack ventilation, install a blank module (RK5001B-4U) in each empty slot.
•
The RK5100PS-5U supplies only power. It does not provide a dock for any other unit connectors.
To mount the NET5301T-I into a rack mount kit:
1. Install the RK5100PS-5U rack mount kit into the rack; refer to the RK5100PS-5U Rack Mount Chassis Installation manual (C1615M).
2. Insert the NET5301T-I into the desired slot.
Figure 8. Multiple NET5301T-I Units in an RK5100PS-5U
3. Tighten the thumbscrew on the rack mount to secure the unit to the rack (refer to Figure 9).
Figure 9. Tighten Thumbscrew to Secure the Unit
TIGHTEN
THUMBSCREW