Справочник Пользователя для Pelco C603M-A (11/07)

C603M-A (11/07)

27

Refer to the Endura WS5000 Advanced System Software Operation manual (C1624M) for details on how to access and configure the 
NET5301T-I video encoder.

Figure 24.  NET5301T-I Front Panel

Pelco badge (power): The Pelco badge glows blue when the unit has power.

Unit status: Unit status is indicated by one of the following three colors:

Green: The unit is functioning normally.

Amber: The unit is in configuration mode.

Red: The unit is in an error condition.

Network status: Network status (connection and speed) is indicated by one of the following conditions:

Off: The unit is not connected to the network.

Solid amber: The unit is connected to the network using the 100BASE-T standard.

Solid red: The unit is connected to the network using the 10BASE-T standard.

NOTE: The NET5301T-I always uses the 100BASE-T standard. If the network status light is red, contact your network administrator or Endura 
certified technician.

Network activity: The network activity indicator flashes whenever the video encoder is sending or receiving network data.

Video presence: Video presence is indicated by one of the following conditions:

Green: Camera video is present at the video in connector.

Red: There is no video; the camera is not functioning properly.

ì

Network Connector

ó

Network Activity

î

Power Indicator

r

Video Presence

ï

Unit Status

s

Reserved

ñ

Network Status