Справочник Пользователя для Barco k5960012-04
220 Barco - RHDM-2301 - User manual
Addendum
• Image displayed on the screen is distorted, shows bands or stripes. In this case something is
wrong with the display unit. Contact Barco or your sales representative.
7.10.2 Fault and warning list
All faults and warnings are shown in the “Faults and warnings” OSD submenu. The number of faults
and warnings are generated with respect to a node. The root node is “0” and will always show when
an error or warning occurs. In the table below, all nodes and error codes which are relevant to the
user are shown.
and warnings are generated with respect to a node. The root node is “0” and will always show when
an error or warning occurs. In the table below, all nodes and error codes which are relevant to the
user are shown.
Error
code
code
Warning/
Fault
Fault
Name
Description
0
Display status
When a fault or warning occurs for one of the nodes listed
below, the error code “0” is generated.
1
Calibration
Node related to calibration warnings due to operation of
the display unit
101
W
Background
Background of window 1 is set to a value out of the cali-
brated range
102
W
Gain
The gain of window 1 is set to a value out of the calibrat-
ed range
103
W
Saturation
The saturation of window 1 is set to a value out of the cal-
ibrated range
104
W
Hue
The hue of window 1 is set to a value out of the calibrated
range
105
W
RGB channels
Not all color channels (R,G,B) are used for the output on
the screen for window 1
106
W
Monochrome
The output to the screen is set to monochrome for win-
dow 1
151
W
Background
Background of window 2 is set to a value out of the cali-
brated range
152
W
Gain
The gain of window 2 is set to a value out of the calibrat-
ed range