Справочник Пользователя для Barco k5960012-04
40 Barco - RHDM-2301 - User manual
How to
• Generate a new license file on my.barco.com.
• Place the license file on a USB stick and connect the USB stick to all display units that need to be
• Place the license file on a USB stick and connect the USB stick to all display units that need to be
updated with the new licenses.
• The following message appears when the update is successful and the display unit will operate
normally immediately:
3.3 How to view signals connected to the SDI input board
Figure 10: Input connectors SDI input board
The standard input board that is mounted in slot 1 is a SDI input board. The SDI input board has
two inputs that are separately connected with a loop-through output connector.
two inputs that are separately connected with a loop-through output connector.
NOTE
:
The input signals are not available at the loop-through output connectors when the display unit is in hard standby
(Power LED = orange).
(Power LED = orange).
IN
OUT
IN
OUT
INPUT 1
INPUT 2
A1
B1
S
L
O
T
1