Справочник Пользователя для Barco k5960012-04
74 Barco - RHDM-2301 - User manual
Full functionality description
NOTE
:
The display unit chooses the power source automatically. A valid power source connected to the 100-240Vac input
has the highest priority.
has the highest priority.
Standby LED:
• Orange: The display unit is powered but is in soft standby mode. All signals at the input boards
are processed. The backlights and panel are turned off.
Calibration/Error LED:
• Orange: The display unit is operating out of the calibrated range.
• Red: A Fault has occurred. On the control panel the “FAULT” LED will light up red as well.
• Red: A Fault has occurred. On the control panel the “FAULT” LED will light up red as well.
IMPORTANT
:
When an error occurs, consult in the OSD menu the OSD submenu “Status controller” to read the warning and/or
fault messages.
fault messages.
4.1.4 Control panel
4.1.4.1 Overview operation control panel
Figure 23: Drawing of the control panel
The control panel allows the user to change a wide variety of settings in a clear and easy way. To
apply the desired settings, the control panel is equipped with:
apply the desired settings, the control panel is equipped with:
• a USB port
• press buttons
• press and rotary knobs
• a trackball
• press buttons
• press and rotary knobs
• a trackball