Справочник Пользователя для Echo 2CS-450

16

CS-450

•  Move chain brake lever fully forward to lock chain 

brake before starting.

•  Confirm there is fuel and chain oil in the tanks.
•  Move ignition switch to “RUN” position.
•  Securely hold the chain saw as shown and pull  

starter handle. 

Choke control knob

Starter handle

•  Move chain brake lever fully forward to lock chain 

brake before starting.

•  Fill the fuel tank with fuel mixture. Do not over fill.
•  Fill the chain oil tank with lubricant.  

Do not over fill.

•  Move ignition switch to “RUN” position.
•  Push purge pump 3 to 4 times or until fuel is visible in 

purge pump.

•  Pull choke control knob all the way out. (Choke posi-

tion)

Do not pull starter rope out to the maximum pos-

sible position.
Do not allow recoil handle to snap back against the 

casing.

•  Securely hold the chain saw as shown and pull starter 

handle several times until first firing sound. 

•  Push choke control knob all the way in.
•  Pull starter handle to start the engine.
•  When engine starts, immediately squeeze throttle trig-

ger, to release throttle latch.

Ignition switch

Chain brake

Choke control knob

Throttle trigger lockout

Throttle trigger

Purge pump

NOTE
If engine does not start after 5 pulls, use cold start 

procedure.

NOTE
If engine does not start after 5 pulls, repeat instruc-

tions.