Справочник Пользователя для Homelite UT43122

Do not connect to power supply until assembly 
is complete. Failure to comply could result in 
accidental starting and possible serious per-
sonal injury.

Do not attempt to modify this product or create 
accessories not recommended for use with this 
product. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

Never use near power lines or other electric 
sources. Contact with power lines or electric 
sources will result in death by electrocution or 
serious injury.

Do not allow familiarity with this product to 
make you careless. Remember that a careless 
fraction of a second is sufficient to inflict seri-
ous injury.

Always wear eye protection with side shields 
marked to comply with ANSI Z87.1, along with 
head protection. Failure to do so could result in 
objects being thrown into your eyes and other 
possible serious injuries.

Do not use any attachments or accessories 
not recommended by the manufacturer of this 
product. The use of attachments or accessories 
not recommended can result in serious personal 
injury.

You may use this product for the purposes listed 
below:


Basic limbing, felling, and woodcutting



Removing buttress roots

See Figure 7
Use HOMELITE Bar and Chain Lubricant. It is 
designed for chains and chain oilers, and is for-
mulated to perform over a wide temperature range 
with no dilution required. 
NOTE: Chain saw comes from the factory with 

no bar and chain oil added. Level should also be 

checked after every 20 minutes of use and refilled 

as needed.


Remove oil cap.



Carefully pour the bar and chain oil into the 

tank.



Wipe off excess oil.



Check and fill the oil tank when quick view oil 

indicator is below the second to last indicator 

line.



Repeat as needed.

 NOTE: Do not use dirty, used or otherwise 

contaminated oils. Damage may occur to the 

bar or chain.

Fig. 7