Справочник Пользователя для Land Pride RCSM3596
11
Section 1: Assembly and Set-Up
6/26/06
RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M
Land Pride
Safety Guards (Optional)
!
DANGER!
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
strongly recommended when cutting along highways or in an
area where people may be present.
speeds; therefore, the use of front and rear safety guards is
strongly recommended when cutting along highways or in an
area where people may be present.
Front Chain Guards
Refer to Figure 1-3
Install the left hand (#2) and right hand (#1) front chain
guards with carriage bolts (#3), and flange nuts (#4). The
narrow end of the chain guards goes to the outside.
RCS3596 is shown. The RCS3510 has a center chain
guard that will assemble between the left hand and right
hand chain guards.
guards with carriage bolts (#3), and flange nuts (#4). The
narrow end of the chain guards goes to the outside.
RCS3596 is shown. The RCS3510 has a center chain
guard that will assemble between the left hand and right
hand chain guards.
Front Chain Guard
Figure 1-3
Rear Chain Guards
Refer to Figure 1-4
Install the rear chain guard (#1) with 1/2” -13 x 1 1/2” long
carriage bolts (#2), and 1/2” flange nuts (#3).
carriage bolts (#2), and 1/2” flange nuts (#3).
Rear Chain Guard
Figure 1-4
NOTE: Do not tighten hardware until assemblies
are complete. Refer to “Torque Values Chart for
Common Bolt Sizes” on page 28.
are complete. Refer to “Torque Values Chart for
Common Bolt Sizes” on page 28.
20704
20705
Front Rubber Guards
Refer to Figure 1-5:
Install each guard of the front rubber guards (#1) with the
carriage bolts (#2) and flange nuts (#3). RCS3596 is
shown. The RCS3510 has a center rubber guard that
will assemble between the left hand and right hand
rubber guards.
carriage bolts (#2) and flange nuts (#3). RCS3596 is
shown. The RCS3510 has a center rubber guard that
will assemble between the left hand and right hand
rubber guards.
Front Rubber Guards (RCS3596 Shown)
Figure 1-5
Rear Rubber Guards
Refer to Figure 1-6
Install the rear rubber guard (#1) and rear guard strap
(#2) with the carriage bolts (#3) and flange nuts (#4).
(#2) with the carriage bolts (#3) and flange nuts (#4).
Rear Rubber Guard
Figure 1-6
20706
20711