Справочник Пользователя для Land Pride RCF2784

12/15/15

1.

Attach tailwheel frame (#1) to outside of rear deck 
lugs with 5/8"-11 x 1 3/4" GR5 cap screws (#3), and 
hex flange nylock nuts (#7). Draw nylock nut up snug, 
do not tighten.

2.

Install two 2 1/4" OD machine washers (#9A & #9B) 
onto tailwheel spindle (#11).

3.

Insert tailwheel spindle (#11) into pivot tube of 
tailwheel frame (#1) and install machine washer 
(#9C) over tailwheel spindle. Secure tailwheel with 
3/8" x 2 1/2" roll pin (#10).

4.

Attach bottom hole of tailwheel adjustment bar (#2) to 
deck rear with 5/8"-11 x 2" GR5 cap screw (#4A), and 
hex nylock nut (#6). Draw nylock nut up tight, do not 
torque tight.

5.

Attach tailwheel adjustment bar (#2) to tailwheel (#1) 
with 5/8"-11 x 2" GR5 cap screw (#4B), spring lock 
washer (#8), and hex nut (#5). Tighten hex nut until 
lock washer (#8) is squeezed flat.

33267