Справочник Пользователя для Echo 99944200490

1.  Set Power Head/Shaft Assembly on a level surface.

2.  Pull locator pin (A) and rotate counter clockwise 1/4 turn to lock  

out position.

3.  Remove vinyl cap from attachment drive shaft.

4.  Remove cardboard spacer, if necessary.

5.  Carefully fit attachment lower drive shaft assembly into coupler (B) 

to decal assembly line (C), making sure that the inner lower drive 

shaft engages into the upper drive shaft mount.

Parts Required:  PAS or SRM-SB Power Head w/Shaft & Coupling.

The ECHO product you have purchased has been factory pre-assembled for your convenience. 

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing 

parts.  Use the contents list to check for missing parts.

_____  1 - Power Blower Attachment

_____  1 - Operators Manual 

_____  1 - Warranty Card

_____  1 - Storage Hook Assembly 

6.  Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft  

hole. Insure locator pin is fully engaged by gently twisting  

lower drive shaft. Locator pin (A) should snap flush in coupler. 

Full engagement will prevent further shaft rotation.

7.  Secure lower shaft assembly to coupler by tightening clamping  

knob (D).

Earlier model Power Heads may have shorter couplings.  Short 

couplings fit flush to decal point (E). New couplings are 4-3/4 in. 

long, and fit flush to line (C).