Справочник Пользователя для Husqvarna 1153191-26

16 – English

Ignition: Set the stop switch to the start position.

Start position is achieved by moving the stop switch 
slightly backwards until the stop switch clicks into start 
position.

It is not allowed to set the stop switch in full throttle 
position.

Choke: Set the choke control in the choke position.

Primer bulb: Press the air purge repeatedly until fuel 
begins to fill the bulb. The bulb need not be completely 
filled.

Use the same starting procedure as for a cold engine but 
without setting the choke control in the choke position.

Hold the body of the machine on the ground using your 
left hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until 
you feel some resistance (the starter pawls grip), now 
quickly and powerfully pull the cord.

 Never twist the starter cord around your hand.

Repeat pulling the cord until the engine starts. When the 
engine starts, return choke control to run position.

CAUTION!  Do not pull the starter cord all the way out and 
do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

The engine is stopped by moving the stop switch to the 
stop position.