Справочник Пользователя для Bush Hog 3227 QT
5-2 OPTIONAL HYDRAULIC VALVE
STAND ASSEMBLY (Figure 5-4)
A. Attach mounting plate to loader frame using
two 5/8 x 5-1/2” bolts, flatwashers, lockwashers and
nuts. Note that this plate may be rotated 180° to
allow three different mounting tube heights.
nuts. Note that this plate may be rotated 180° to
allow three different mounting tube heights.
B. Attach mounting bracket to plate using two 1/2
x 1-1/2” bolts, lockwashers and nuts.
C. Attach mounting tube to bracket using 1/2 x 3”
bolts, lockwashers and nuts. The slotted hole also
requires a flatwasher, as shown.
requires a flatwasher, as shown.
D. Attach valve plate to tube using U-bolts, lock-
washers and nuts. Note: Mounting tube may be
too long for tractor being mounted and should be
cut to desired length.
too long for tractor being mounted and should be
cut to desired length.
Figure 5-4 Valve Stand Assembly
25
Shield
Operational
Decal
Decal
Valve
Plate
Plate
Tube
Mounting Plate
5/8 X 6-1/2”
Mounting Bracket
1/2 X 1-1/2”
1/2 X 3”
5/16 X 3”
5/16 X 1”
5/16 X 2-1/2”
(2)
Optional Brace
Optional
Mounting Bracket
3/8 x 1-1/4”
1/2 x 1-1/2”
5/8 x 6-1/2”
5/16 x 3”