Справочник Пользователя для Alamo TX235

ASSEMBLY

TX235 02/07

Assembly Section 3-5

ASSEMBL

CASTER WHEEL ATTACHMENTS - REAR MOWER

Attach the right and left Axle Arm Weldment (1) to
the deck with bolts (2) flatwasher (3), and locknuts
(4). Install two flanges (5), two1/4 inch spacer (6)
and three one inch spacers (7) on each fork and
wheel assembly shaft (8). Insert fork shaft (8) into
axle arm weldment (1). Install two additional 1/4
inch spacers (6) on each axle shaft (8) and retain
using Snapper Pin (9). Asm-R-0327.

NOTE: Caster Wheel Mounting Beams Item #1
may be shipped attached to deck.

CASTER WHEEL ATTACHMENTS - WING MOWER

Attach the right and left Axle Arm Weldment (1) to
the deck with bolts (2) flatwasher (3), and locknuts
(4). Install two flanges (5), two1/4 inch spacer (6)
and four one inch spacers (7) on each fork and
wheel assembly shaft (8). Insert fork shaft (8) into
axle arm weldment (1). Install two additional 1/4
inch spacers (6) on each axle shaft (8) and retain
using Snapper Pin (9). Asm-R-0328.

NOTE: Axle arm toward center of machine must
have bracket attached so that transport bar maybe
installed as show. When minimun transport width is
desired always raise and lock bar in vertical
position.