Справочник Пользователя для Alamo 5
OPERATION
SB5/6 03/09
Operation Section 3-20
© 2009 Alamo Group Inc.
OPERA
T
ION
7.6 Shutting Down the Switch Blade
To shut down implement, first bring the tractor to a
complete stop. Decrease engine RPM to idle then
disengage implement. The implement will come to
a complete stop within a suitable amount of time.
Do not engage or disengage the implement at a
high RPM unless there is an emergency situation.
complete stop. Decrease engine RPM to idle then
disengage implement. The implement will come to
a complete stop within a suitable amount of time.
Do not engage or disengage the implement at a
high RPM unless there is an emergency situation.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, shut down the engine, remove the
key, and wait for all motion to come to a complete
stop before exiting the tractor. OPS-SB- 0008
transmission in park or neutral and apply the
parking brake, shut down the engine, remove the
key, and wait for all motion to come to a complete
stop before exiting the tractor. OPS-SB- 0008
BEFORE leaving the tractor seat, always engage the brake and/or set
the tractor transmission in parking gear, disengage the PTO, stop the
engine, remove the key, and wait for all moving parts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
from rolling. Never dismount a Tractor that is moving or while the engine
is running. Operate the Tractor controls from the tractor seat only.
the tractor transmission in parking gear, disengage the PTO, stop the
engine, remove the key, and wait for all moving parts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
from rolling. Never dismount a Tractor that is moving or while the engine
is running. Operate the Tractor controls from the tractor seat only.
(SG-9)