Справочник Пользователя для Radware VOYA-GRAND-MBK

September 25, 2012

7075-166

Page  41

R

Standard Size: 43 in. W x 31 in. H

Large Size: 51 in. W x 34 in. H

1.  Lay surround face down on a protected surface to pre-

vent scratching.

2.  Using  a  4  to  6  inches  long  Phillips  head  screw  driver

attach the side surrounds to the top surround using (2) 

#8 sheet metal screws on each side provided with the kit.

Figure 41.2.

3.  Lay the trim face down and place the corner brackets into

position.

4.  Using  a  standard  flat  screw  driver  tighten  the  corner

brackets.

Figure 41.3.

5.  Slide the assembled trim set over the surround set. and

then over the appliance matching the mounting tabs on 

the side pieces with the slots on the appliance.  

6.  Align  the  2  screws  in  the  top  surround  piece  to  the  2

alignment holes on the appliance top. Secure in place.

Figure 41.2. 

7.  Use the strain relief in the surround side for blower cord

installation and use the cover plug to insert into the hole 

where the blower cord is not installed.

Corner Brackets

1.  Once  you  have  the  appliance  in  place  and  secured,

remove  the  tube  channel  assembly,  baffle  board  and

ceramic  blanket.    Detailed  instructions  are  found  on

2.  Reach up through the flue opening and grab the attach-

ment bar and pull down inside flue opening.

Figure 41.1.

3.  Insert the 5/16 bolts inside the cast flue and through the

chimney mounting bar. Securely tighten the nuts. Fas-

teners are provided.

4.  Re-install  the  tube  channel  assembly,  baffle  board,

ceramic blanket and baffle protection channel.

5/16 Nuts

Attachment 

Bar

5/16 Bolts

Strain Relief for 

Blower Cord and 

Cover Plug for hole  

in each side

Secure 2 Sides to Top

Mounting Tabs 

Slide into Slots 

on Firebox Face

Secure to 

Firebox Face