Листовка для John Deere 1400

1) 60-IN. FRONT BLADE:
•  Heavy-gauge steel construction; concave 

surface for good rolling action and effi cient use 
of tractor horsepower

•  Blade has reinforcing angle behind front edge for 

strength and durability. 

•  Large coil “breakaway” springs allow bottom of 

blade to be pushed back if solid object is struck. 

• Easy-on and easy-off; no tools required.

• Blade angle is controlled from operator’s seat.

•  Adjustable skid shoes prevent wear to

cutting edge.

•  Fits all John Deere 1400 and 1500 Series 

Front Mowers.

2) 47-IN. HEAVY-DUTY SNOW BLOWER:
•  Two-stage design with low-speed auger and 

high-speed discharge blower removes snow 
more effi ciently.

•  Shear-bolt-protected auger and drive system.

•  16-inch diameter auger with sealed 

ball bearings.

•  Worm-gear drive with durable cast-iron housing.

•  Snowblower rides on a hydraulically controlled 

transport wheel for easy movement; retracts 
automatically when unit is lowered to the ground.

•  Reversible, replaceable cutting edge.

•  With hydraulic kit, chute can be angled 

hydraulically (up to 20 degrees).

•  Telescoping U-jointed driveshaft for easier hook-up.

•  Three-position skid shoes.

• Drift knife.

•  Adjustable discharge chute.

•  Fits all John Deere 1400 and 1500 Series 

Front Mowers.

•  23×8.5 tires are recommended for use with 

this implement.

3) 60-IN. HEAVY-DUTY ROTARY BROOM:
•  Broad 60-inch working width, 24-inch diameter 

for good cleaning and long life.

•  32 alternating wafers of polypropylene and steel 

bristles provide fl icking action for more thorough 
cleaning.

•  Mechanical drive; 5-way angling, straight ahead 

to 15 to 30 degrees left or right, hydraulic-angling 
kit available.

•  Hinge and spring on gearbox hood-shield for 

protection and easy access to PTO shafts.

•  Side-shield for the sprocket and chain drive 

holds front Quik-Tatch stand (an exclusive 
John Deere feature).

•  Hood defl ector (a John Deere exclusive) helps 

keep debris ahead of broom and defl ect thrown 
objects to the ground.

•  Fits all John Deere 1400 and 1500 Series 

Front Mowers.

4) 59-IN. SNOW BLOWER:
•  Snow blower can be installed and removed 

in minutes. 

•  Standard drift knife cuts through deep drifts and 

provides a clean-cut snowbank. 

•  Hydraulic chute angling allows operator to 

change direction of snow blowing with ease. 

•  Driven by a live PTO, snow blower continues 

to operate at full speed even when changing 
traction ground speed. 

•  Two-stage design of auger and high-speed 

blower provide aggressive snow-biting action 
through heavy or packed snow. Greater capacity 
than single-stage snow blower. 

•  Adjustable defl ector changes height and

 distance that snow can be blown.

•  Fits all John Deere 1400 and 1500 Series 

Front Mowers.

3

2

4

1

C&CE P

URCHASING

 G

UIDE

 2008