Справочник Пользователя для Holder C 9.72 H
Operating Instructions
145 052
121
C 9700 ... C 9.88 H
Other activities
Lights
Turning On and Operating the Lights
NOTE
Turn the preheat/starter switch to position 1.
Turn the preheat/starter switch to position 1.
-
Set the light switch (1) to the 1st position.
The front clearance lights (2, 7) and rear tail lights (9,
14) (sidemarker light) are on.
The front clearance lights (2, 7) and rear tail lights (9,
14) (sidemarker light) are on.
-
The position light indicator (2) in the multi-function
display comes on.
display comes on.
-
Set the light switch (1) to the 2nd position
The front headlights (1, 8) (dip beam) are on.
The front headlights (1, 8) (dip beam) are on.
Turning On High Beam
-
Set the light switch (1) to the 2nd position.
-
Move the turn signal lever (4) down. The headlights
(1, 8) are set to high beam.
(1, 8) are set to high beam.
-
The high beam indicator (3) in the multi-function
display comes on.
display comes on.
NOTE
To use the headlight flasher, operate the
signal lever up.
To use the headlight flasher, operate the
signal lever up.
Bild_095
1
2
3
4