Справочник Пользователя для Husqvarna YTH2042 TWIN

•  ATTACH REAR LIFT LINKS (C) - Lift rear corner of 

mower and position slot in link assembly over pin 

(D) on rear mower bracket and secure with washer 

and retainer spring.

•  Install belt on engine pulley (M), in belt keepers (G).
IMPORTANT:  CHECK BELT FOR PROPER ROUTING 

IN ALL MOWER PULLEY GROOVES.
•  Raise attachment lift lever to highest position.
•  If necessary, adjust gauge wheels before op er at ing 

mower as shown in the Operation section of this 

manual.

•  ATTACH FRONT LINK (E) - Work from left side of 

tractor. Insert rod end of link assembly through front 

hole in tractor front suspension bracket (F).

• 

Insert end of link (E) into hole in front mower bracket 

and secure with washer and retainer spring (J).