Справочник Пользователя для Husqvarna Auto Mower

English-

47

If this occurs in isolated areas it may 
be due to interference from metallic 
objects (perimeter fence, reinforce-
ment bar) or buried cables in the 
vicinity.

Try to move the boundary wire.

The working area slopes too much.

Check that the boundary wire has 
been routed correctly.

The boundary wire has been routed 
the wrong way around an ”island”.

Check that the boundary wire has 
been routed in accordance with the 
installation instructions.

The boundary wire is too close to the 
edge of the working area.

Check that the boundary wire has 
been routed correctly.

Auto Mower cannot find the charging 
station.

Change the position of the charging 
station.

The battery is defective.

Contact your dealer to replace the 
battery

Wrong PIN code has been entered. 
Three attempts are permitted, the 
keypad is then blocked for five min-
utes.

State the correct PIN code.

Auto Mower has become caught in 
something.

Free the mower and rectify the reason 
for the lack of drive. If it is due to wet 
grass, wait until the lawn has dried 
before using the mower.

The Auto Mower makes poor contact 
with the contact stripes in the charg-
ing station.

Check that the Auto Mower has 
docked correctly in the charging sta-
tion.

The contact between the charging 
strips and contact strips may be poor 
and the Auto Mower has made a 
number of charging attempts.

Place the Auto Mower in the charging 
station and check that the charging 
strips and contact strips make good 
contact.

An object is obstructing the Auto 
Mower

Remove the object.

An object is preventing the Auto 
Mower from reversing out of the 
charging station.

Remove the object.

The Auto Mower leans too much or 
has turned over.

Turn the mower the right way up.

The Auto Mower is set in MAN oper-
ating mode.

This behaviour is normal; no action 
required.