Справочник Пользователя для Husqvarna MZ5225ZT / 966690501

Скачать
Страница из 64
OPeRaTION
28
WARNING!
Lead-acid batteries generate 
explosive gases. Keep sparks, flame 
and smoking materials away from 
batteries. Always wear eye protection 
when around batteries.
Weak Battery
8011-642
Jumper cable connection
IMPORTANT INFORMATION
The mower is equipped with a 12-volt negative 
grounded system. The other vehicle must also 
be a 12-volt negative grounded system. Do not 
use the mower to start other vehicles.
If “jumper cables” are used for emergency starting, 
follow this procedure:
Jumper Cables
Connect each end of the ReD cable to the 
• 
POSItIVe (+) terminal on each battery, taking 
care not to short against chassis.
Connect one end of the BLACK cable to the 
• 
neGAtIVe (-) terminal of the fully charged battery.
Connect the other end of the BLACK cable to a 
• 
good CHASSIS GROUnD on the mower with the 
discharged battery, away from the fuel tank and 
battery.
To remove cables, reverse order
Remove BLACK cable first from chassis and then 
• 
from the fully charged battery.
Remove ReD cable last from both batteries.
• 
IMPORTANT INFORMATION
Refer to the EFM Information Sheet from the 
unit literature packet for specific jump starting 
instructions.