Справочник Пользователя для Husqvarna LT130

•

Remove cardboard packing from seat pan and lift seat
pan to raised position.

•

Open battery box door.

•

Remove terminal protective caps and discard.

•

If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.

•

First connect RED battery cable to positive (+) terminal
with hex bolt, flat washer, lock washer and hex nut as
shown.  Tighten securely.

•

Connect BLACK grounding cable to negative (-) termi-
nal with remaining hex bolt, flat washer, lock washer
and hex nut.  Tighten securely.

•

Close battery box door.

Open battery box door for:

•

Inspection for secure connections (to tighten hard-
ware).

•

Inspection for corrosion.

•

Testing battery.

•

Jumping (if required).

•

Periodic charging .

Adjust seat before tightening adjustment knob.

•

Remove cardboard packing on seat pan.

•

Place seat on seat pan and assemble shoulder bolt.

•

Assemble adjustment knob and flat washer loosely.
Do not tighten.

•

Tighten shoulder bolt securely.

•

Lower seat into operating position and sit on seat.

•

Slide seat until a comfortable position is reached which
allows you to press clutch/brake pedal all the way
down.

•

Get off seat without moving its adjusted position.

•

Raise seat and tighten adjustment knob securely.