Справочник Пользователя для Minelab P0591-A
THE MINELAB EXPLORER II
57
QUICKSTART
5
AUDIO: ADJUSTING THE SOUNDS
Ferrous
Main Menu > Audio > Sounds > FERROUS
Selecting FERROUS adjusts the tone according to the target’s
ferrous content (the horizontal axis of the Smartfind screen or the
first number in the Digital display). A low ‘blaat’ tone denotes a highly
ferrous object, displayed on the left of the screen and having a high
‘Fer’ number. A high pitched ‘squeak’ tone denotes a non-ferrous
target, displayed on the right of the Smartfind screen and having a
low ‘Fer’ number.
ferrous content (the horizontal axis of the Smartfind screen or the
first number in the Digital display). A low ‘blaat’ tone denotes a highly
ferrous object, displayed on the left of the screen and having a high
‘Fer’ number. A high pitched ‘squeak’ tone denotes a non-ferrous
target, displayed on the right of the Smartfind screen and having a
low ‘Fer’ number.
Clear the Smartfind screen to test the Ferrous sound. There are two
ways to do this: adjust the Iron Mask level to -16 or choose CLEAR
from Main Menu > Discrim > SELECT.
ways to do this: adjust the Iron Mask level to -16 or choose CLEAR
from Main Menu > Discrim > SELECT.
NOTE
When the Iron Mask is set to the left of the Smartfind
screen (setting -16) there will be a maximum variation in
pitch between detected objects. When the Iron Mask is fully
activated (setting 0) there will be no signal for objects with
ferrous content.
pitch between detected objects. When the Iron Mask is fully
activated (setting 0) there will be no signal for objects with
ferrous content.