Справочник Пользователя для American Standard 2770.XXXW Series

for selecting an American Standard bath. Your new 
bath is shipped to you after careful inspection. The 
whirlpool version is completely assembled with pump, 
motor, and system piping. All you need to finish the 
installation are your selected fittings and electrical 
connections for a whirlpool.

To insure maximum performance and pleasure from 
this product, please follow the instructions and 
cautions. 

Carefully uncrate and inspect your new bath for any 
shipping damage. If such damage is found, report it to 
your vendor immediately.

After inspection and during installation, protect the bath 
from construction damage. After installation, and before 
enclosing with wallboard, tile, etc., water test the unit 
and check for leaks.

If a whirlpool, do not make modifications to the whirlpool 
system or remove pump from factory mounting. This 
could adversely affect the safety and performance of the 
whirlpool and void the warranty. Do not handle or move 
the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided 
with the bath and must be ordered separately. Framing 
and enclosing materials are provided by others. Check 
for availability of optional American Standard wall tiling 
bead (required for recess installations).

Protect all finished surfaces of the whirlpool during 
construction and installation using a drop cloth.  

752481-100 Rev. H

© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.

List of Optional Components (not included):
•  Tile Bead Kit 751755-100*
•  Apron Kit*
* see your American Standard Distributor

List of Required Components (not included):
•  Drain 1583.470*       •  Bath Filler* 
* see your American Standard Distributor

Tools
•  Level
•  Tape Measure
•  Pipe Wrench
•  Slip Joint Pliers
•  Screw Driver
•  Standard
      Woodworking Tools
•  Personal Safety
      Equipment
•  Caulking Gun

Supplies
•  Nails
•  Putty
•  Caulking (waterproof)
•  1 x 3 or 2 x 2
      Stringers
•  Drop Cloth
•  15 amp GFI
      Outlet
•  Cement, Plaster,
      Grout

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

  59-7/8 x 31-3/4 x 19-3/4 In.

(1521mm x 806 mm x 502mm)

85 Lbs. (39 Kg.)

535 Lbs. (243 Kg.)

54 Gal. (204 L.)
49 Gal. (186 L.)

20 x 40 In. (508mm x 1016mm)

53-1/2 x 26 In. (1359mm x 699mm)

14 In. (356mm)

41 Lbs./Sq. Ft. (197 Kgs/Sq. m.)

15.6
29.6

INSTALLED SIZE

WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT

3

)

1.1 HP, 9.9 AMPS, 120V.

SYSTEM I PUMP

464 mm

(18-1/4)

38 mm

(1-1/2)

502 mm

(19-3/4)

1-1/2 O.D.TAILPIECE

INTEGRAL

SUPPORT

FEET

■ 

LEVELING 

   STRINGER 
   NOT FOR 
   SUPPORT 

ROUGH

FLOOR

70mm

(2-3/4)

305 mm

(12)

OPTIONAL TO 

INISHED FLOOR 

SUALLY BETWEEN

1651 & 1981mm 

(65 & 78)

C/L OF
OVERFLOW

102 mm

(4)

C/L OF
SPOUT

C/L OF
VALVES

C/L OF
SHOWER ARM

70 mm

(2-3/4)

 117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

1521 mm

(59-7/8)

806 mm

(31-3/4)

OUTLINE OF CUTOUT 
1483 mm x 768 mm
(58-3/8 X 30-1/4 )

403 mm

(15-7/8)

222 mm

(8-3/4)

305 mm

(12)

60mm

(2-3/8)

(8) JETS

CUTOUT IN FLOOR
FOR DRAIN

PUMP

FINISHED

WALL

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

EE FITTING

PECS FOR

MENSIONS

(2) AIR VALVES

ON/OFF
SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS