Справочник Пользователя для Black Box MPSH16-D20-120V

 

3.  When the terminal emulation program is ready to receive the file, return to 

the Outlet Managed PDU’s Save Parameter File menu, and press [Enter] to 

proceed.  Parameters will be saved on your hard drive in the file specified in 

Step 2 above.

4.  The Outlet Managed PDU will send a series of ASCII command lines which 

specify currently selected parameters.  When the download is complete, press 

[Enter] to return to the command prompt.

15.2.  Restoring Saved Parameters

This section describes the procedure for using your terminal emulation program to 

send saved parameters to the Outlet Managed PDU.

1.  Start your terminal emulation program and access the Outlet Managed PDU’s 

command move via the Text Interface, using a username/password that 

permits access to Administrator level commands (see Section 5.1.1.)

2.  Configure your terminal emulation program to upload an ASCII text file.

3.  Upload the ASCII text file with the saved parameters.  If necessary, key in the 

file name and directory path.

4.  Your terminal emulation program will send the ASCII text file to the Outlet 

Managed PDU.  When the terminal program is finished with the upload, 

make certain to terminate the Upload mode.

Note:

5.  If the parameter upload is successful, the Outlet Managed PDU will send a 

confirmation message, and then return to the command prompt.  Type 

/S and 

press [Enter], the Status Screen will be displayed.  Check the Status Screen 

to make certain the unit has been configured with the saved parameters.