Справочник Пользователя для Hampton Bay 122 135

REMEMBER to turn off the power. Follow the 
steps below to hang your fan properly.

Attach the mounting bracket to the outlet box 
with two screws and washers provided with the 
outlet box. Make sure the bracket is tight and 
secured (Fig. 4).

Lift fan into position by hanging the motor 
assembly onto the hook from the ceiling 
mounting bracket allowing it to hang freely 
(Fig. 5).

1.

2.

Connect the ground cnductor of the 120V 
supply (this may be a bare wire or a wire with 
green colored insulation) to the green ground 
lead(s) of the fan (Figure 6).

Connect the fan motor white wire to the supply 
white (neutral) wire using a wire nut. (Figure 
6)

Connect the fan motor black wire to the supply 
black (hot) wire using a wire nut (Figure 6).

Connect the blue wire for light kit to the black 
household supply wire.

Turn wire nut connections upward, spreading 
them apart so the green (ground) will be on one 
side of the outlet box and the white, black and 
blue wire will be on the other side, and push 
carefully up into the outlet box.

1.

2.

3.

4.

5.

Figure 5

Figure 4

Outlet Box

Mounting Bracket

REMEMBER to disconnect the power.

If you feel you do not have enough electrical 
wiring knowledge or experience, have your fan 
installed by a licensed electrician.

Follow the steps below to connect the fan to your 
household wiring. Use the wire nuts supplied with 
your fan. Secure the wire nuts with electrical tape. 
Make sure there are no loose strands or 
connections.

Motor