Справочник Пользователя для Intel N455 AU80610006237AA
Модели
AU80610006237AA
Electrical Specifications
42
Datasheet
NOTES:
1.
1.
For functional operation, all processor electrical, signal quality, mechanical and thermal
specifications must be satisfied.
specifications must be satisfied.
2.
Excessive overshoot or undershoot on any signal will likely result in permanent damage to
the processor.
the processor.
3.
Storage temperature is applicable to storage conditions only. In this scenario, the
processor must not receive a clock, and no lands can be connected to a voltage bias.
Storage within these limits will not affect the long-term reliability of the device. For
functional operation, please refer to the processor case temperature specifications.
processor must not receive a clock, and no lands can be connected to a voltage bias.
Storage within these limits will not affect the long-term reliability of the device. For
functional operation, please refer to the processor case temperature specifications.
4.
This rating applies to the processor and does not include any tray or packaging.
5.
Failure to adhere to this specification can affect the long-term reliability of the processor.
6.
V
CC
is a VID based rail.
Possible damage to the processor may occur if the processor temperature exceeds 150
°C.
Intel
does not ensure functionality for parts that have exceeded temperature above 150
°C
due to
specification violation.
4.10
DC Specifications
lists the DC specifications for the processor and are valid only while
meeting the thermal specifications, clock frequency, and input voltages.
4.10.1
Voltage and Current Specifications
list the DC specifications for the processor core and I/O
buffer; they are valid only while meeting specifications for junction temperature, clock
frequency, and input voltages. The Highest Frequency Mode (HFM) and Lowest
Frequency Mode (LFM) refer to the highest and lowest core operating frequencies
supported on the processor. Active mode load line specifications apply in all states
except in the Deeper Sleep state. V
frequency, and input voltages. The Highest Frequency Mode (HFM) and Lowest
Frequency Mode (LFM) refer to the highest and lowest core operating frequencies
supported on the processor. Active mode load line specifications apply in all states
except in the Deeper Sleep state. V
CC,BOOT
is the default voltage driven by the voltage
regulator at power up in order to set the VID values. Unless specified otherwise, all
specifications for the processor are at T
specifications for the processor are at T
J
= 100°C. Care should be taken to read all
notes associated with each parameter.
V
CCSFR_DMIHMPLL
Processor DMI SFR voltage
with respect to V
with respect to V
SS
-0.3
2.25
V
V
CC_GIO
Processor GIO voltage with
respect to V
respect to V
SS
3.135
3.465
V
T
STORAGE
Storage temperature
-40
85
°C
3, 4, 5
VinLGIO
LGIO Buffer DC Input Voltage
with Respect to V
with Respect to V
SS,
-0.1
1.45
V
VinAsynch_CMOS CMOS Buffer DC Input Voltage
with Respect to V
SS
-0.1
1.45
V
Table 4-20.Processor Absolute Minimum and Maximum Ratings (Sheet 2 of 2)
Symbol
Parameter
Min
Max
Unit
Notes
1, 2