Справочник Пользователя для Invacare 6418
2
Assembling the Overbed Table - Model 6418
NOTE: For this procedure, refer to FIGURE 2.
1. Invert the tilt‐top board and place on
the floor.
2. Attach the mast to the supporting
bracket on the bottom of the tilt‐top
board with the bolt, washer, and nut.
board with the bolt, washer, and nut.
3. Attach the base above the mast with the
two bolts, washers, and inserts.
4. Install the four casters into the four
holes provided in the base.
5. Flip the overbed table back to the
upright position.
FIGURE 2 Assembling the Overbed Table -
Mounting
Screws
Bolts
Washers
Inserts
Casters
Casters
Top Board
Base
Tilt-Top Board
Bolts
Washers
Inserts
Casters
Casters
Bolt
Washer
Nut
Supporting
Bracket
Mast
Base