Справочник Пользователя для Multiquip DCA-600SSK

To reduce the possibility of an accident while transporting
the generator on public roads, always make sure the trailer
(Figure 4) that supports the generator and the towing vehicle
are in good operating condition and both units are
mechanically sound.

The following list of suggestions should be used when towing
your generator:

■ ALWAYS attach trailer's safety chain to bumper of towing

vehicle.

ALWAYS  make sure the vehicle and trailer directional,
backup, brake, and trailer lights are connected and  working
properly.

Remember the maximum speed unless otherwise posted for
highway towing is 45 MPH. Recommended off-road towing
is not to exceed 10 MPH or less depending on type of terrain.

Place 

chocked blocks underneath wheel to prevent rolling,

while parked.

Place 

support blocks underneath the trailer's bumper to

prevent 

tipping,  while parked.

Use the trailer's hand winch to adjust the height of the trailer,
then insert locking pin to lock wheel stand in place, while
parked.

Avoid sudden stops and starts. This can cause skidding, or
jackknifing. Smooth, gradual starts and stops will improve
gas milage.

Avoid sharp turns to prevent rolling.

Remove wheel stand when transporting.

DO NOT transport generator with fuel in tank.

Make sure the hitch and coupling of the towing vehicle are
rated equal to, or greater than the trailer "gross vehicle weight
rating" (GVWR).

ALWAYS inspect the hitch and coupling for wear. NEVER
tow a trailer with defective hitches, couplings, chains etc.

Check the tire air pressure on both the towing vehicle and
the trailer. Also check the tire tread wear on both vehicles.

ALWAYS make sure the trailer is equipped with a "Safety
Chain".

Check with your county or state safety towing regulations
before towing your generator.