Справочник Пользователя для Siemens CGZHS

Скачать
Страница из 38
Safety Procedure
This equipment contains hazardous voltages.  Death,
serious personal injury or property damage can result if
safety instructions are not followed.
The successful and safe operation of motors/generators is
dependent upon proper handling, installation, operation
and maintenance, as well as upon proper design and
manufacture.  Failure to follow certain fundamental
installation and maintenance requirements may lead to
personal injury and the failure and loss of the motor as well
as damage to other property.
Only qualified personnel should work on or around this
equipment after becoming thoroughly familiar with all
warnings, safety notices and maintenance and repair
procedures and all plant safety procedures must be
observed.
Qualified Person: For the purpose of this manual and
product labels, a Qualified Person is one who is familiar
with the installation, construction and operation of the
equipment, and the hazards involved.  In addition, he or
she has the following qualifications:
a.
Is trained and authorized to energize, de-energize,
clear, ground and tag circuits and equipment in
accordance with established safety practices.
b.
Is trained in the proper care and use of protective
equipment, such as rubber gloves, hard hat, safety
glasses, face shields, flash clothing, etc., in
accordance with established safety practices.
c.
Is trained in rendering first aid.
Danger:
For the purpose of this manual and product
labels,  Danger indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
Warning: For the purpose of this manual and product
labels, Warning indicates a potentially hazardous situation
which, if not avoided, will result in death or serious injury.
Caution:
For the purpose of this manual and product
labels, Caution indicates a potentially hazardous situation
which, if not avoided, will result in minor or moderate injury.
Motors should be installed and grounded per local and
national codes.
Do not operate this equipment in excess of the values
given on nameplate or contrary to the instructions
contained in this manual.  The equipment (or prototype)
has been factory-tested and found satisfactory for the
conditions for which is was sold.  Operating in excess of
these conditions can cause stresses and strains beyond
design limitations.  Failure to heed this warning may result
in equipment damage and possible personal injury .
Hazardous voltage.
Will cause death, serious injury,
electrocution or property damage.
Disconnect all power before working on
this equipment.
NOTE
Squirrel cage induction machines can be driven by
various types of prime movers.  These will act as
induction generators.  This instruction manual applies to
both motors and induction generators.  However, for
clarity reasons, the machine will be referred to as a
“motor.”